Skip to content

Commit

Permalink
Add dasbob
Browse files Browse the repository at this point in the history 
Signed-off-by: Leo Lou <[email protected]>
  • Loading branch information
@l4u
l4u committed Feb 24, 2024
1 parent df1690a commit c39469c
Show file tree
Hide file tree
Showing 7 changed files with 316 additions and 0 deletions.
69 changes: 69 additions & 0 deletions keyboards/dasbob/config.h
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,69 @@
// Copyright 2022 grooovebob (@grooovebob)
// SPDX-License-Identifier: GPL-2.0-or-later

#pragma once

#define MATRIX_ROWS 8
#define MATRIX_COLS 5

#define DIRECT_PINS { \
{ GP13, GP28, GP12, GP29, GP0 }, \
{ GP22, GP14, GP26, GP4, GP27}, \
{ GP21, GP23, GP7, GP20, GP6 }, \
{ GP16, GP9, GP8, NO_PIN, NO_PIN } \
}

#define DIRECT_PINS_RIGHT { \
{ GP0, GP29, GP12, GP28, GP13 }, \
{ GP27, GP4, GP26, GP14, GP22}, \
{ GP6, GP20, GP7, GP23, GP21 }, \
{ GP8, GP9, GP16, NO_PIN, NO_PIN } \
}


/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* Serial Config */
#define USE_SERIAL
#define SERIAL_USART_TX_PIN GP1
#define MASTER_LEFT

/* I2C Pin mapping */
//#define I2C1_SDA_PIN GP7
//#define I2C1_SCL_PIN GP6
//#define I2C1_CLOCK_SPEED 400000
//#define I2C_DRIVER I2CD2

// Set the mouse settings to a comfortable speed/accuracy trade-off,
// assuming a screen refresh rate of 60 Htz or higher
// The default is 50. This makes the mouse ~3 times faster and more accurate
#define MOUSEKEY_INTERVAL 16
// The default is 20. Since we made the mouse about 3 times faster with the previous setting,
// give it more time to accelerate to max speed to retain precise control over short distances.
#define MOUSEKEY_TIME_TO_MAX 40
// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive
#define MOUSEKEY_DELAY 100
// It makes sense to use the same delay for the mouseweel
#define MOUSEKEY_WHEEL_DELAY 100
// The default is 100
#define MOUSEKEY_WHEEL_INTERVAL 50
// The default is 40
#define MOUSEKEY_WHEEL_TIME_TO_MAX 100

// Pick good defaults for enabling homerow modifiers
#define TAPPING_TERM 200
#define PERMISSIVE_HOLD
#define USB_VBUS_PIN 19
#define AUDIO_PWM_DRIVER PWMD2
#define AUDIO_PWM_CHANNEL RP2040_PWM_CHANNEL_B
#define AUDIO_STATE_TIMER GPTD4
#define AUDIO_PIN GP5
#ifdef AUDIO_ENABLE
#define AUDIO_INIT_DELAY
#define AUDIO_CLICKY
#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.0f
#define STARTUP_SONG SONG(STARTUP_SOUND)
#endif

#define STARTUP_SOUND E__NOTE(_E6), E__NOTE(_A6), ED_NOTE(_E7),
11 changes: 11 additions & 0 deletions keyboards/dasbob/halconf.h
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,11 @@
#pragma once

#undef HAL_USE_SIO
#define HAL_USE_SIO TRUE

#define HAL_USE_I2C TRUE

#define HAL_USE_PWM TRUE
#define HAL_USE_PAL TRUE

#include_next <halconf.h>
56 changes: 56 additions & 0 deletions keyboards/dasbob/info.json
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,56 @@
{
"manufacturer": "grooovebob",
"keyboard_name": "dasbob",
"maintainer": "grooovebob",
"processor": "RP2040",
"bootloader": "rp2040",
"url": "",
"usb": {
"device_version": "1.0.0",
"pid": "0x0000",
"vid": "0xFEED"
},
"community_layouts": ["split_3x5_3"],
"layouts": {
"LAYOUT_split_3x5_3": {
"layout": [
{ "matrix": [0, 0], "x": 0, "y": 0.25 },
{ "matrix": [0, 1], "x": 1, "y": 0.25 },
{ "matrix": [0, 2], "x": 2, "y": 0.125 },
{ "matrix": [0, 3], "x": 3, "y": 0 },
{ "matrix": [0, 4], "x": 4, "y": 0.125 },
{ "matrix": [4, 0], "x": 8, "y": 0.25 },
{ "matrix": [4, 1], "x": 9, "y": 0.125 },
{ "matrix": [4, 2], "x": 10, "y": 0 },
{ "matrix": [4, 3], "x": 11, "y": 0.125 },
{ "matrix": [4, 4], "x": 12, "y": 0.25 },
{ "matrix": [1, 0], "x": 0, "y": 1.25 },
{ "matrix": [1, 1], "x": 1, "y": 1.25 },
{ "matrix": [1, 2], "x": 2, "y": 1.125 },
{ "matrix": [1, 3], "x": 3, "y": 1 },
{ "matrix": [1, 4], "x": 4, "y": 1.125 },
{ "matrix": [5, 0], "x": 8, "y": 1.25 },
{ "matrix": [5, 1], "x": 9, "y": 1.125 },
{ "matrix": [5, 2], "x": 10, "y": 1 },
{ "matrix": [5, 3], "x": 11, "y": 1.125 },
{ "matrix": [5, 4], "x": 12, "y": 1.25 },
{ "matrix": [2, 0], "x": 0, "y": 2.25 },
{ "matrix": [2, 1], "x": 1, "y": 2.25 },
{ "matrix": [2, 2], "x": 2, "y": 2.125 },
{ "matrix": [2, 3], "x": 3, "y": 2 },
{ "matrix": [2, 4], "x": 4, "y": 2.125 },
{ "matrix": [6, 0], "x": 8, "y": 2.25 },
{ "matrix": [6, 1], "x": 9, "y": 2.125 },
{ "matrix": [6, 2], "x": 10, "y": 2 },
{ "matrix": [6, 3], "x": 11, "y": 2.125 },
{ "matrix": [6, 4], "x": 12, "y": 2.25 },
{ "matrix": [3, 0], "x": 3.5, "y": 3.25 },
{ "matrix": [3, 1], "x": 4.5, "y": 3.5 },
{ "matrix": [3, 2], "x": 5.5, "y": 3.75 },
{ "matrix": [7, 0], "x": 7.5, "y": 3.75 },
{ "matrix": [7, 1], "x": 8.5, "y": 3.5 },
{ "matrix": [7, 2], "x": 9.5, "y": 3.25 }
]
}
}
}
114 changes: 114 additions & 0 deletions keyboards/dasbob/keymaps/default/keymap.c
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,114 @@
#include QMK_KEYBOARD_H

enum dasbob_layers {
_QWERTY,
_LOWER,
_RAISE
};


const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* ┌───┬───┬───┬───┬───┐ ┌───┬───┬───┬───┬───┐
* │ Q │ W │ E │ R │ T │ │ Y │ U │ I │ O │ P │
* ├───┼───┼───┼───┼───┤ ├───┼───┼───┼───┼───┤
* │ A │ S │ D │ F │ G │ │ H │ J │ K │ L │ ; │
* ├───┼───┼───┼───┼───┤ ├───┼───┼───┼───┼───┤
* │ Z │ X │ C │ V │ B │ │ N │ M │ , │ . │ / │
* └───┴───┴───┴───┴───┘ └───┴───┴───┴───┴───┘
* ┌───┐ ┌───┐
* │DEL├───┐ ┌───┤ESC│
* └───┤SPC├───┐ ┌───┤BSP├───┘
* └───│LOW│ │RSE├───┘
* └───┘ └───┘
*/


[_QWERTY] = LAYOUT_split_3x5_3(
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
KC_A, RALT_T(KC_S), LCTL_T(KC_D), LSFT_T(KC_F), KC_G, KC_H, LSFT_T(KC_J), LCTL_T(KC_K), RALT_T(KC_L), KC_SCLN,
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
KC_DEL, KC_SPC, MO(1), MO(2), KC_BSPC, KC_ESC
),

[_LOWER] = LAYOUT_split_3x5_3(
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
CK_RST, RALT_T(XXXXXXX), LCTL_T(XXXXXXX), LSFT_T(XXXXXXX), KC_PSCR, KC_MINS, LSFT_T(KC_EQL), LCTL_T(KC_GRV), RALT_T(KC_QUOT), KC_BSLS,
CK_TOGG, CK_UP, CK_DOWN, LCTL(KC_C), LCTL(KC_V), KC_TAB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
KC_TRNS, KC_TRNS, KC_TAB, KC_ENT, KC_TRNS, KC_TRNS
),

[_RAISE] = LAYOUT_split_3x5_3(
KC_ESC, KC_UP, XXXXXXX, XXXXXXX, CK_TOGG, KC_NUM_LOCK, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_MINUS,
KC_LEFT, RALT_T(KC_DOWN), LCTL_T(KC_RGHT), LSFT_T(XXXXXXX), KC_LGUI, XXXXXXX, LSFT_T(KC_KP_4), LCTL_T(KC_KP_5), RALT_T(KC_KP_6), KC_KP_PLUS,
KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_PSCR, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_0,
KC_TRNS, KC_TRNS, KC_TAB, KC_ENT, KC_TRNS, KC_TRNS
),


};
#ifdef OLED_ENABLE

oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_0; }
bool oled_task_user(void) {
if (is_keyboard_master()) {
static const char PROGMEM runqmk_logo[] = {0,0,0,0,152,152,152,152,152,152,24,24,24,
152,152,24,24,24,152,152,24,24,152,152,24,24,24,152,152,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,127,127,13,13,29,63,103,64,0,63,127,96,96,96,127,63,0,0,127,127,7,12,56,
127,127,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,120,252,134,198,198,252,120,0,0,254,254,
60,224,224,60,254,254,0,254,254,16,24,124,230,130,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,24,24,25,25,25,25,27,24,24,25,25,24,25,25,24,25,25,24,25,25,24,24,24,24,25,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0};


oled_write_raw_P(runqmk_logo, sizeof(runqmk_logo));

led_t led_usb_state = host_keyboard_led_state();
oled_set_cursor(6, 3);
oled_write_P(led_usb_state.num_lock ? PSTR("NUM") : PSTR(""), false);
oled_set_cursor(6, 2);
oled_write_P(PSTR("WPM: "), false);
oled_write(get_u8_str(get_current_wpm(), '0'), false);
oled_set_cursor(6, 0);
oled_write_P(PSTR("by GroooveBob"), false);
oled_set_cursor(6, 1);
oled_write_P(PSTR("Layer: "), false);

switch (get_highest_layer(layer_state)) {
case _QWERTY:
oled_set_cursor(12, 1);
oled_write_P(PSTR("Default\n"), false);
break;
case _LOWER:
oled_set_cursor(12, 1);
oled_write_P(PSTR("Lower\n"), false);
break;
case _RAISE:
oled_set_cursor(12, 1);
oled_write_P(PSTR("Raise\n"), false);
break;
default:
// Or use the write_ln shortcut over adding '\n' to the end of your string
oled_set_cursor(6, 1);
oled_write_ln_P(PSTR("Undefined"), false);
}
} else {
static const char PROGMEM dasbob_logo[] = {
0, 0, 0, 0, 0,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128, 0, 0, 0, 0, 0,128,128,128,192,192,192,192,192,192,192,192,192,192,192,128,128, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128,128,128,128,128,128,128,128,128, 0, 0, 0,128,128,128,128,128,192,192,192,192,192, 0, 0, 0,128,128,128,128,128,128,128,128,128, 0, 0, 0, 0,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128, 0, 0,
0, 0,126,127,255,255,255,255,255,255,255,199,247,255,255,255,255,255,255,255,255,127,252,255,255,255,255,255,255,255,255,255, 15,127,255,255,255,255,255,255,255,255,254,248, 0,126,127,255,255,255,255,255,255,255,199,247,255,255,255,255,255,255,255,255,127,126,255,255,255,255,255,255,255,255,239,239,239,239,207,223,223,223,159, 63, 0, 7, 63,255,255,255,255,255,255,255,254, 14,254,255,255,255,255,255,255,255, 63,241,252,254,255,255,255,255,255,255,255, 31,255,255,255,255,255,255,255,255,255,255,128, 0,
0, 0,126,255,255,255,255,255,255,255,255,227,255,255,255,255,255,255,255,255,255, 0, 15, 63,127,255,255,255,255,255,255,255,248,255,255,255,255,255,255,255,255,127, 63, 7, 0,126,255,255,255,255,255,255,255,255,227,255,255,255,255,255,255,255,255,255,128,252,253,249,249,251,251,251,251,251,255,255,255,255,255,255,255,255,127, 30, 0, 0, 0, 3, 31,255,255,255,255,255,255,255,255,255,255,255,255,255,255, 7, 0, 63,255,255,255,255,255,255,255,255,255,248,255,255,255,255,255,255,255,255,255,255,255, 0,
0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0,
};
oled_write_raw_P(dasbob_logo, sizeof(dasbob_logo));
}
return false;
}
#endif
15 changes: 15 additions & 0 deletions keyboards/dasbob/mcuconf.h
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,15 @@
#pragma once

#include_next <mcuconf.h>

#undef RP_SIO_USE_UART0
#define RP_SIO_USE_UART0 TRUE

#undef RP_I2C_USE_I2C1
#define RP_I2C_USE_I2C1 TRUE

#undef RP_PWM_USE_PWM2
#define RP_PWM_USE_PWM2 TRUE

#undef RP_PWM_USE_TIM1 //hier bin ich gerade nicht mehr sicher ob das auch für Audio gebraucht wird
#define RP_PWM_USE_TIM1 TRUE
27 changes: 27 additions & 0 deletions keyboards/dasbob/readme.md
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,27 @@
# dasbob

![alt text](https://github.com/GroooveBob/DASBOB/blob/main/pic/dasbob.png)

DASBOB is a 36-key diodeless split with splay and buzzer.

* Keyboard Maintainer: [grooovebob](https://github.com/grooovebob)
* Hardware Supported: elite c
* Hardware Availability: https://github.com/GroooveBob/DASBOB

Make example for this keyboard (after setting up your build environment):

make dasbob:default

Flashing example for this keyboard:

make dasbob:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
24 changes: 24 additions & 0 deletions keyboards/dasbob/rules.mk
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,24 @@


# Bootloader selection
BOOTLOADER = rp2040

# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = yes # Unicode
AUDIO_ENABLE = yes # Audio output
SPLIT_KEYBOARD = yes # Use shared split_common code
OLED_ENABLE = yes
WPM_ENABLE = yes
LTO_ENABLE = yes
SERIAL_DRIVER = vendor
AUDIO_DRIVER = pwm_hardware

0 comments on commit c39469c

Please sign in to comment.