In this project, we have implemented the microprocessor FE310-G002 utilizing RISC-V core on HiFive 1 rev B board.
We have broken down this project into 3 labs. It is as follows:
The objectives of this lab was to:
- create a PlatformIO project and write, assemble and debug the code.
- Observe and document the operation of microprocessor core as it executes code.
The objectives of this lab was to:
- Configure MCU internal peripherals
- Operate the GPIO pins
The objectives of this lab was to:
- make real world application to implement annunciator system.
This annunciator will generate 3 outputs from the system as shown in the diagram below: